Graco FR60 User Manual
Page 15
FR60 Owner’s Manual
9
Getting Started
Removing the Foot Pod
Press the tab on the front of the lace
clip to remove the foot pod.
Installing the Foot Pod Under
the Insole
nOTE: Your compatible shoe will
have a pocket under the insole.
You may need to remove a foam
insert before installing the foot
pod.
1. Press the tab on the lace clip. Lift
and separate the foot pod from
the lace clip.
2. Lift the insole of the shoe.
3. Place the foot pod in the pocket
with the ANT+™ logo facing up
and the notch pointing toward the
toe of your shoe.
Training with the Foot Pod
1. Bring the FR60 within range (3 m)
of the foot pod.
2. Press
MODE
to access training
mode. The
foot pod icon
appears on the training page.
3. If
or foot pod data does not
appear, you may have to pair the
foot pod and the FR60.
.
Calibrating the Foot Pod
Calibrating your foot pod is optional
and can improve accuracy. You can
automatically or manually adjust the
calibration.
Auto Calibration with a
Known Distance
The minimum calibration distance is
400 m. For best results, calibrate the
foot pod using the longest distance
possible at your typical pace. A
regulation track (one lap = 400 m) is
more accurate than a treadmill.
1. Press
MODE
>
SETTINGS
>
SPORT
>
RUN
>
FOOT POD
>
CALIBRATE
>
AUTO
.
2. Press
START
to begin recording.
3. Run or walk the known distance.
4. Press
STOP
.