Using the gsc™ 10, Using the weight scale, Using the gsc – Graco FR60 User Manual
Page 16
10
FR60 Owner’s Manual
Getting Started
5. Use
UP
and
down
to adjust the
calibration distance to the actual
distance.
6. Press
ENTER
to save the
calibrated distance.
Manual Calibration
If your foot pod distance seems
slightly high or low each time you
run, you can manually adjust the
calibration factor.
1. Press
MODE
>
SETTINGS
>
SPORT
>
RUN
>
FOOT POD
>
CALIBRATE
>
MANUAL
.
2. Use
UP
and
down
to adjust the
calibration factor.
3. Press
ENTER
to save the
calibration factor.
Turning Off the Foot Pod
After 30 minutes of inactivity, the
foot pod automatically turns off to
conserve the battery.
Using the GSC
™
10
Your watch is compatible with the
GSC 10 speed and cadence sensor
for bikes. The GSC 10 is an optional
accessory that is available at
.
Using the Weight Scale
If you have an ANT+ compatible
weight scale, the FR60 can read the
data from the weight scale.
1. Press and hold
LIGHT/
until
the FR60 starts scanning.
2. Stand on the scale when
indicated.
nOTE: If using a body
composition scale, remove shoes
and socks to ensure that all body
composition parameters are read
and recorded.
3. Step off the scale when indicated.
nOTE: If an error occurs, step off
the scale. Step on when indicated.