Geemarc AMPLI455 - Manual (Page 22)

20
Dialling Mode Setting
In the UK, all telephone exchanges now use Tone dialing. If your
telephone does not dial out, it is probably being used from an
older private switch- board (PBX). In this case, the Tone/Pulse
setting must be changed to Pulse.
Press ‘MENU’ soft key
Use
S
and
T
to select ‘SET PHONE’
Press ‘SELECT’ soft key
Use
S
and
T
to select ‘DIALLING MODE’
Press ‘SELECT’ soft key
Use
S
and
T
to select either ‘TONE’ or ‘PULSE’
Press ‘SELECT’ soft key to confirm
Setting Date and Time
In standby mode, the telephone displays the current date and time.
You need to set the date and time so that when you receive calls
they will appear in the call list with the correct date and time. If
you subscribe to a Caller ID service, the time and date will be set
automatically when you receive your first call.
Press ‘MENU’ soft key
Use
S
and
T
to select ‘DATE AND TIME’
Press ‘SELECT’ soft key
SETTINGS SETTINGS