Geemarc AMPLI455 - Manual (Page 30)

28
Mute Function
If you wish, you can speak privately to someone else in the room
without your caller overhearing. You will still be able to hear the
caller but they cannot hear you during the mute operation.
To switch on the mute mode during a call press the
‘MUTE’ soft
key ( ‘MUTE’ will be displayed on the LCD). Your caller will not
be able to hear you anymore. Press ‘UNMUTE’ soft key to
resume the conversation with your caller ( ‘MUTE’ will no longer
displayed on the LCD).
Hold Function
You can put a call on hold. Do this by simply pressing the
‘HOLD’ soft key during a call. The LCD will display ‘CALL
ON HOLD’ . If you hang up now, the call will not be
disconnected.
To continue the conversation, simply pick up the handset or press
the ‘UNHOLD’
soft key.
Receiving a Call
When an incoming call is received, the telephone rings and the
incoming call indicator lights up. If you have a voice message,
NEW VOICE MAIL will be shown on the LCD. To delete the
voice message, press
S
in standby then press and hold
4
.
Lift the handset and speak
To end the call simply replace the handset in the cradle
Receiving a call – Hands Free
Press
SPKR
to speak hands free
To end the call press
SPKR
USING THE TELEPHONE