Geemarc AMPLI455 - Manual (Page 50)

48
Press to delete the current message
Press once to re-play the current message
Press twice to re-play the previous message
Press to play the next message
Press or ‘EXIT’ soft key to stop the playing and exit
To adjust the playback volume use VOL+ or VOL- on the right
side of the telephone. You can also use the amplify function
whilst using the answering machine.
When playback is finished the machine will return to standby
mode. All incoming messages are saved (unless you have erased
any during playback, see above), new messages will then be
recorded after the old ones.
Call Screening
Incoming messages can be heard through the Speakerphone as
they are received. If there is no sound, adjust the volume using
the control on the right hand side of the telephone.If you want to
speak to the caller, lift the handset.
Incoming Message Voice Slow
If you are struggling to hear or understand the message left by a
caller, you can play it back in a slow mode.
Press ‘MENU’ soft key
Use
S
and
T
to select ‘TAM SETUP’
Press ‘SELECT’ soft key
ANSWERING MACHINE