Geemarc AMPLI455 - Manual (Page 33)

31
The features described in this section are only available if you
subscribe to a Caller ID service from your network provider.
Caller ID means you can see who is calling on your handset
display (provided the number is not withheld, unavailable or is an
international call).
The display shows ‘PRIVATE’ for a witheld number.
The display shows ‘Out of Area’ when someone calls from
an area where the telephone company is not offering caller
identification services or is not yet providing number delivery to
your area.
Whether you take a call or not, the caller’s telephone
number/name together with the date and time of the call are
stored in the Caller ID list. This book stores the last 30 incoming
calls of up to 15 digits.
The New Call LED will flash to notify you of a new call. If you do
not want the New Call LED to be lit to notify you of a new call,
switch the new call indicator switch (found on the right side
of the unit) to Off.
View Caller ID List
Use
S
and
T
to scroll through the Caller ID list. The
numbers will be listed in the order they were received.
Scrolling through this list in order to review any new calls
sets the New Call count to zero and the New Call LED
wiill be switched off
Dial a Number from the Caller ID List
Use
S
and
T
to scroll through the Caller ID list until you
find the desired number
Pick up the handset or press the
SPKR
key, the number
is automatically dialled.
CALLER ID CALLER ID