Settings – Geemarc AMPLI455 User Manual
Page 26
24
The
button on the telephone base provides additional
amplification of 15dB i.e the volume adjustment available is 15-30
dB. When the amplify function is activated, the Amplify LED is lit.
Setting a default for Amplification.
The Amplify ON /OFF (
) located at the rear allows the
amplification facility to be switched ON or OFF as a default each
time you use the telephone.
AMPLIFY ON/OFF Switch at ON Position (
)
The additional amplification and tone controls are automatically
activated each time you use the telephone. The amplify LED
light will be lit when you use the telephone.
Pressing the Amplify key (
)during a call will turn off the
additional amplification and tone controls. However, you can still
adjust the handset receive volume with the Volume slide bar.
Irrespective of how many times you press the Amplify key (
)
throughout a call, the next time you pick up the handset to make a
new call, these functions will be activated once again.
AMPLIFY ON/OFF Switch at OFF Position (
)
The additional amplification and tone controls are turned off each
time you use the telephone. The Amplify LED will be off
whenever you use the telephone.
SETTINGS