Gateway GT5448E - Manual (Page 63)

www.gateway.com
57
12 Remove the seven system board screws.
13 Lift the system board up and out of the case.
14 Align the new system board on the screw holes in the
case, then secure it into the case with the screws.
15 If your replacement system board does not include a
processor, go to
Step 16 .
-OR-
If your replacement system board includes a processor,
go to
Step 21 .
16 Loosen the four screws that secure the heat sink to the
old system board, then remove the heat sink and place
it on a stable surface with the flat surface of the heat
sink (the side with the thermal grease) up.
Screws
Screws
Screws Screws
8511861.book Page 57 Monday, December 18, 2006 11:20 AM