Installation instructions, Installation – Stovax Ceramica Manhattan Wood Stove User Manual

Page 18

Advertising
background image

18

INSTALLATION INSTRUCTIONS

INSTALLATION

5.4 Place the second ash panel to the right of the first, with the

pointed end of the panel fitting into the V shape. This panel

should locate on the screw holes of the burner skin. Ensure

that both logs are horizontal to the burner ports.

5.5 Place log E across from the rear of log A to log C on the right

hand side. Again, there are cut-outs for location. The front of

the log should sit on the front ash panels and should fit tight

to log C. See diagram 20.

5.6

Ensure that the fibreglass seal on the back of the door is

intact, locate the door on the four studs and slide back to

the firebox. Secure in place using the four dome nuts and

tool supplied, do not overtigthen the nuts.

NEVER OPERATE THE STOVE WHEN THE DOOR IS

REMOVED.

6. LIGHTING

6.1 Full instructions are given in the User section under Lighting

the Stove.

AR1615

19

20

AR1616

Advertising