Great Dane C5 Chariot GCKH2352S - Manual (Page 25)

Service Engine - 23
SERVICE ENGINE
6.Grease traction drive belt tension arm pivot (G).
7.Grease mower deck drive belt tension arm (H).
NOTE: Use spray lubricant to lubricate the following items:
8.Lubricate mower deck idler pulleys (K-M).
9.Lubricate hydraulic pump control arms (N).
10.Lubricate control lever pivot shaft (O).
11.Lubricate seat platform hinges (P).
12.Lubricate throttle control cable (Q).
13.Lubricate choke control cable (R).
Service Engine
Engine Warranty Maintenance Statement
Maintenance, repair, or replacement of the emission control devices and
systems on this engine, which are being done at the customer’s expense,
may be performed by any non-road engine repair establishment or
individual. Warranty repairs must be performed by an authorized servicing
dealer.
Avoid Fumes
Engine Oil
Use oil viscosity based on the expected air temperature range during the
period between oil changes.
Use oil that meets the following specification:
• See the engine manufacturer’s owner’s manual provided with your
machine for the correct specifications.
CAUTION: Avoid injury! Engine exhaust fumes contain
carbon monoxide and can cause serious illness or death.
Move the machine to an outside area before running the
engine.Do not run an engine in an enclosed area without
adequate ventilation.•
•Connect a pipe extension to the engine exhaust pipe to
direct the exhaust fumes out of the area.
•Allow fresh outside air into the work area to clear the
exhaust fumes out.