Greenheck Fan 452413 - Manual (Page 8)

8 Canopy Hood
®
HOOD STANDING SEAM
HANGING CLIP BOLTED TO PLENUM SHELL
HANGING CLIP
HOOD FRONT
"C" CLAMP
SUPPLY PLENUM SHELL
HANGER BRACKET
END VIEW
THREADED ROD
HOOD
ATTACH HANGING CLIP TO
HOOD STANDING SEAM WITH
THE SUPPLIED "C" CLAMPS
(OPTIONAL: DRILL AND BOLT A
1/4-20 SS BOLT THROUGH
THE CLIP AND HOOD STANDING
SEAM)
HANGING METHODS FOR SUPPLY PLENUMS
ASP, FSP AND VSP
TOP VIEW
HOOD
TOP VIEW
SUPPLY PLENUM
2 CLIPS ARE NEEDED
3 CLIPS ARE NEEDED
FOR PLENUMS > 96"
FOR PLENUMS <= 96"
THE THIRD CLIP IS LOCATED
IN THE CENTER OF THE PLENUM
LENGTH
THREADED ROD
OPTION #3
HANGING CLIP
OPTION #1
OPTION #1
ON THE END OF THE HOOD
HANGING CLIP COULD BE 23.5" FROM
END IF THERE IS A UTILITY CABINET
OPTION #1
OPTION #1
THE HOOD AND IS MOUNTED TO THE ASP
HOOD UP CANTILEVERS OVER THE END OF
THE UNI-STRUT (U-CHANNEL) THAT HOLDS THE
HANGER BRACKETS
OPTION #2
OPTION #2
UNI-STRUT SUPPLIED BY OTHERS
OPTION #1 = HANGING CLIP
OPTION #2 = UNI-STRUT
OPTION #3 = THREADED ROD
OPTIONAL
UTILIT
Y
CABINET
NOTE: SUPPLY PLENUMS ARE STANDARDLY SUPPLIED WITH HANGING CLIPS (OPTION 1),
IF OPTION #1 IS NOT APPLICABLE, USE OPTIONS 2 0R 3
SUPPLIED BY OTHERS
11.5
23.5
HOOD STANDING SEAM
HANGING CLIP BOLTED TO PLENUM SHELL
HANGING CLIP
HOOD FRONT
"C" CLAMP
SUPPLY PLENUM SHELL
HANGER BRACKET
END VIEW
THREADED ROD
HOOD
ATTACH HANGING CLIP TO
HOOD STANDING SEAM WITH
THE SUPPLIED "C" CLAMPS
(OPTIONAL: DRILL AND BOLT A
1/4-20 SS BOLT THROUGH
THE CLIP AND HOOD STANDING
SEAM)
HANGING METHODS FOR SUPPLY PLENUMS
ASP, FSP AND VSP
TOP VIEW
HOOD
TOP VIEW
SUPPLY PLENUM
2 CLIPS ARE NEEDED
3 CLIPS ARE NEEDED
FOR PLENUMS > 96"
FOR PLENUMS <= 96"
THE THIRD CLIP IS LOCATED
IN THE CENTER OF THE PLENUM
LENGTH
THREADED ROD
OPTION #3
HANGING CLIP
OPTION #1
OPTION #1
ON THE END OF THE HOOD
HANGING CLIP COULD BE 23.5" FROM
END IF THERE IS A UTILITY CABINET
OPTION #1
OPTION #1
THE HOOD AND IS MOUNTED TO THE ASP
HOOD UP CANTILEVERS OVER THE END OF
THE UNI-STRUT (U-CHANNEL) THAT HOLDS THE
HANGER BRACKETS
OPTION #2
OPTION #2
UNI-STRUT SUPPLIED BY OTHERS
OPTION #1 = HANGING CLIP
OPTION #2 = UNI-STRUT
OPTION #3 = THREADED ROD
OPTIONAL
UTILIT
Y
CABINET
NOTE: SUPPLY PLENUMS ARE STANDARDLY SUPPLIED WITH HANGING CLIPS (OPTION 1),
IF OPTION #1 IS NOT APPLICABLE, USE OPTIONS 2 0R 3
SUPPLIED BY OTHERS
11.5
23.5
SUPPLY PLENUM SHELL
HOOD FRONT
HANGING CLIP
2.120
1.000
147.0°
57.4°
1.000
1.000
Form Down 147°
Form Up 57
°
1.375 2.125 1.000
3.000
0.563
0.563
0.750
0.750
4.500
.500 x .375
SLOT (3 PLACES)
0.625
1.500
0.625
Supply Plenum Clip
Using the Uni-strut
1. The uni-strut (supplied by others) that holds
the hood up cantilevers over the end of the
hood and is mounted to the supply plenum
hanger brackets.
HOOD STANDING SEAM
HANGING CLIP BOLTED TO PLENUM SHELL
HANGING CLIP
HOOD FRONT
"C" CLAMP
SUPPLY PLENUM SHELL
HANGER BRACKET
END VIEW
THREADED ROD
HOOD
ATTACH HANGING CLIP TO
HOOD STANDING SEAM WITH
THE SUPPLIED "C" CLAMPS
(OPTIONAL: DRILL AND BOLT A
1/4-20 SS BOLT THROUGH
THE CLIP AND HOOD STANDING
SEAM)
HANGING METHODS FOR SUPPLY PLENUMS
ASP, FSP AND VSP
TOP VIEW
HOOD
TOP VIEW
SUPPLY PLENUM
2 CLIPS ARE NEEDED
3 CLIPS ARE NEEDED
FOR PLENUMS > 96"
FOR PLENUMS <= 96"
THE THIRD CLIP IS LOCATED
IN THE CENTER OF THE PLENUM
LENGTH
THREADED ROD
OPTION #3
HANGING CLIP
OPTION #1
OPTION #1
ON THE END OF THE HOOD
HANGING CLIP COULD BE 23.5" FROM
END IF THERE IS A UTILITY CABINET
OPTION #1
OPTION #1
THE HOOD AND IS MOUNTED TO THE ASP
HOOD UP CANTILEVERS OVER THE END OF
THE UNI-STRUT (U-CHANNEL) THAT HOLDS THE
HANGER BRACKETS
OPTION #2
OPTION #2
UNI-STRUT SUPPLIED BY OTHERS
OPTION #1 = HANGING CLIP
OPTION #2 = UNI-STRUT
OPTION #3 = THREADED ROD
OPTIONAL
UTILIT
Y
CABINET
NOTE: SUPPLY PLENUMS ARE STANDARDLY SUPPLIED WITH HANGING CLIPS (OPTION 1),
IF OPTION #1 IS NOT APPLICABLE, USE OPTIONS 2 0R 3
SUPPLIED BY OTHERS
11.5
23.5
Installing External Supply Plenums
Fig. 6
Fig. 7
Fig. 8
Using the Supply Plenum Clip
Note: The supply plenum is provided with
plenum clips that assist in hanging the plenum.
The plenum should not be hung only with the
plenum clips, threaded rod or uni-strut must
also be used.
1. Bolt the hanging clip to the supply plenum.
Two clips are needed for plenums less than
96 in. (243.84 cm) long and three for plenums
greater than 96 in. (243.84 cm). The third clip
is located in the center of the plenum length.
If there is a utility cabinet, the hanging clip
should be 23.5 in. (59.69 cm) from the end to
the hood.
2. Using the c-clamps provided, clamp the
supply plenum hanging clip to the hood
standing seam. Option: Drill and bolt a
1/4-20 SS bolt through the clip and hood
standing seam.