Gateway 6400 User Manual
Page 12
Advertising
Front panel
3
Front panel LEDs indicate the following when lit:
■
Power On LED (steady green indicates power is on and blinking green
indicates system is in sleep mode).
■
HDD Activity LED (green) indicates when hard drive is active.
■
NIC Activity LED (green) indicates LAN activity.
■
System Fault LED (yellow) indicates ECC (Error Checking and
Correcting) memory system fault (steady indicates an uncorrectable ECC
fault and blinking indicates a correctable ECC fault).
System Fault LED reset switch is used to clear system fault LED.
Power button turns the computer on and off. It also enables sleep-mode in
some operating systems.
Reset button restarts the system when it becomes non-responsive.
05032.book Page 3 Monday, July 10, 2000 11:43 AM
Advertising