Gateway 6400 - Manual (Page 72)

Replacing the system fans 63
To install the new rear system fan assembly:
1 Place the fan bracket unit into the chassis by engaging the four retaining
tabs with the holes in the back of the chassis and sliding the unit to the
right until the two locking pins click into place.
2 Plug the fan power cable into the appropriate connector on the system
board.
3 Close the case by following the instructions on page 20.
4 Reconnect peripherals, the modem cord, and the power cord, then turn
on the system.
05032.book Page 63 Monday, July 10, 2000 11:43 AM