Gateway 6400 User Manual
Page 60
Advertising
Replacing the system board
51
7
Loosen the retaining screw at the right rear of the chassis.
8
Slide the system board toward the front of the chassis slightly, to
disengage it from the stand-off retention hooks, then remove it carefully.
9
Remove the system board mounting bracket by removing the two screws
securing it to the system board (refer to the illustrations on page 52) and
place the board in an antistatic bag or container.
System board
retaining screw
Standoff
retention hook
05032.book Page 51 Monday, July 10, 2000 11:43 AM
Advertising