Garland H280 User Manual
Page 10
Advertising
07/19/07
P/N 4522555
Page 10
13) Attach Main Burner Gas Line Flex Tubes onto Valve
•
Two brass fittings (Part 7, Assembly Drawing) should already be installed on the Main
Burner gas inlet and outlet on the Baso valve.
•
Unscrew the free end of each fitting to release the nut and ferrule. Install these on one
end of each 7/16” flex tube (Part 2, Assembly Drawing) and attach the tubes to the Main
Burner gas inlet and outlet on the Baso valve. See picture below for details.
Nut and ferrule unscrewed from fitting on valve, installed on one free end of each 7/16” flex tube
Advertising