Garland H280 - Manual (Page 2)

07/19/07 P/N 4522555 Page 2
Instructions:
1) Remove Kick Plate
• Remove the two screws and washers at the hinge of the kick plate.
• This kick plate will not be reinstalled.
Left: Unscrewing hinge screw of kick plate
Right: Original kick plate. Will not be reinstalled.
2) Remove Front Air Shield
• The air shield is located directly above orifice. Remove by unscrewing two screws on the
top of the shield
• Do not dispose. Will be reinstalled later.
Left: Front Air Shield installed
Right: Front Air Shield uninstalled