Garland H280 - Manual (Page 5)

07/19/07 P/N 4522555 Page 5
5) Remove Aeration Plate (if present)
• If the pilot is installed on the left side of the burner in a horizontal position, unscrew the
bracket connecting the pilot bracket to the aeration plate.
• The plate is attached to the oven with two screws directly underneath the oven burner
orifice and another screw at the back end of the aeration plate.
Left: Removal of 2 screws underneath orifice
Right: Removed aeration plate with accompanying screws
6) Remove Original Pilot Assembly
• If pilot is installed on left side everything should now be detached and the entire
assembly can simply be pulled out
• If pilot is installed on the right side, unscrew the pilot bracket from the oven bottom and
remove the assembly.