Garland H280 - Manual (Page 15)

07/19/07 P/N 4522555 Page 15
19) Attach Valve Onto Bracket
• The valve is attached to the bracket using the bolt and nut provided (Part 13 and Part 12,
Assembly Drawing). Insert the bolt into the hole through the valve and align it with the
small hole on the back of the bracket. The large hole on the front may be used to insert
the bolt into position.
• Screw the nut onto the protruding end of the bolt behind the bracket.
Attaching bolt inserted through hole in valve indicated by arrow
Nut holding bold in place on back of bracket