Garland GIWOK 3.5 (SH/WO 3500) - Manual (Page 10)

Part # 4521635 (03/04/08) Page 10
Figure # 1 - Correct Coil (Spoil) Connection
This connection must be well insulated and slightly bent upwards so the terminal end, does
not make contact with the high voltage section on the power board.
Coil wires must be tightly twisted together and precisely
placed.
Coil terminals must be connected in the direction shown
in photo.
General Checks
• Protection connection grounded?
• Screwed connections all tight?
• Isolations of cables?
• Any kind of liquids that have entered the cooker?
• Dirt in the cooker?