GE MULTILINK ML1200 - Manual (Page 278)

17–8 MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL
MISCELLANEOUS COMMANDS CHAPTER 17: MISCELLANEOUS COMMANDS
17.4 History
17.4.1 Commands
The commands below may be useful in repeating commands and obtaining history
information.
The !! command repeats the last command.
!!
The !1 , !2 ,..., !n commands repeat the nth command (as indicated by a show history).
!<n>
The
show history
command displays the last 25 executed commands. If less than 25
commands were executed, only those commands executed are shown.
show history
The history is cleared if the user logs out or if the switch times out. The history count
restarts when the user logs in.
The show version command displays the current software version.
show version