GE MULTILINK ML1200 - Manual (Page 288)

17–18 MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL
MISCELLANEOUS COMMANDS CHAPTER 17: MISCELLANEOUS COMMANDS
The port mirroring commands are shown below. Refer to Chapter 9 - Port Mirroring and
Setup for additional details.
• help port-mirror
• prtmr : enables/disables port mirroring functionality
• setport : defines the port mirroring ports
The port security commands are shown below. Refer to Chapter 6 - Securing Access for
additional details.
• action : sets the action type of secured port
• allow : allows MAC addressing per port
• help port-security
• learn : enables/disables security for a single port or group of ports
• ps : enables/disables security in system
• remove : removes MAC addressing per port
• signal : sets the signal type of the secured port
The quality of service (QoS) commands are shown below. Refer to Chapter 14 - QoS
Overview for additional details.
• help qos
• setqos : configures QOS configuration usage
• set-untag
• set-weight : sets the port priority weights for all the ports in all the device
• show-portweight : displays the current port weight priority
The remote monitoring (RMON) commands are shown below. Refer to Chapter 16 -
Configuring RMON for additional details.
• alarm : sets the owner for the alarm group
• event : sets the owner for the event group
• help rmon
• history : sets the owner for the history group
• statistics : sets the owner for the statistics group
The Rapid Spanning Tree Protocol (RSTP) commands are shown below. Refer to Chapter 13
- Rapid Spanning Tree Protocol for additional details.
• cost : sets the path cost of ports
• forceversion : set the force version of STP
• help rstp
• lll
• port : sets the RSTP administration status of ports
• priority : changes the priority of ports or bridge
• rstp : changes the RSTP administrative status of the bridge
• show-forceversion : shows the current force version of RSTP
• show-mode : shows the port mode status
• show-timers : shows the bridge time parameters
• timers : changes the bridge time parameters