Geemarc Ampli DECT150 - Manual (Page 21)

CALLER IDENTIFICATION
1 - CALLER ID FEATURES
IMPORTANT: You need to subscribe to a Caller ID service from your local phone
company if you wish to use this feature.
Caller ID will show the caller name and phone number on the handset display. If the
phone number is stored in the phone book, the corresponding name will be displayed
with the correct ring tone (phone book ring tone).
The display shows ****** for private call (caller does not want to show his or her
name and number).
The 10 last incoming calls are automatically stored in Caller ID list.
When the memory is full, the oldest call will be replaced by the last one.
Note: The symbol will be displayed if you receive a call in your absence.
2 - DIAL CID NUMBERS
1 - Press the key.
2 - Select the desired number to dial by pressing the ( ) or ( ) key.
Two short beeps will be heard if you reach the end of the list.
3 - Press the
key to dial the number or press the to display the
time and the date of the call or press the key to exit the menu.
3 - STORE NUMBERS AND NAMES INTO THE PHONE BOOK
1 - Press the key.
2 - Select the desired number to store in the phone book by pressing the ( )
or ( ) keys. Two short beeps will be heard if you reach the end of the list.
3 - Select the desired phone book in which you want to store the number by pressing
the
or key.
4 - Store the name as described in “PHONEBOOK” item.
5 - Press the
to confirm the storage in the phone book.
21