Geemarc Ampli DECT150 - Manual (Page 24)

24
Note: to get the maximum efficiency and maximum range you must put the handset
near the base unit. The handset range will be the same for each handset.
3 - DEREGISTER ALL ADDITIONAL HANDSETS FROM THE BASE
To deregister all handsets from the base unit follow the instructions below:
1 - Take one handset.
2 - Press the
key.
3 - Press the and the keys to enter number 1/1 0000 will be dispalyed.
4 - Enter the base unit PIN code (factory setting to 1111), then press key.
All additional handsets are deregistered from the base unit.
Note: handset used to deregister the additional handsets is not deregistered.
4 - INTERNAL CALLS
When you are using several handsets registered to the same base unit, you can
make internal calls handset to handset. To make a call handset to handset please
follow instructions below:
1 - Press the key.
2 - All other handsets will ring.
3 - Press the
key to answer the call.
A tone signal will be heard during a call when you receive an external call. To
answer the external call you must finish your internal call first.
ADDITIONAL HANDSETS