Geemarc Ampli DECT150 - Manual (Page 26)

ADDITIONAL BASE UNIT
26
1 - GENERAL SETTINGS
Several base units can be connected to the network in order to extend the range of
the handsets. When several base units are registered to a handset, it can
automatically search for the next base unit if you go outside the range of the first
base unit. The transfer between base units is handled automatically, although this
cannot be done whilst a call is in progress. Handset will keep its connection with
one of the base units until it loses connection due to having moved out of range. In
this case, the handset searches for a new base unit in its registration list.
The base units coverage areas must overlap to ensure there are no gaps in the
coverage. Otherwise the radio connection will be lost.
2 - HOW TO ADD A BASE UNIT
1 - Connect the additional base on the network phone socket.
2 - Plug in the adaptor.
3 - Register the handset to the base unit as described before.
Remark: The first registered handset has priority on the first base. It will be activated
when the handset will move to the second base (move to the new radio range).
To check if your handset or all handsets registered to this base are registered
simply press the page button
on the new base, all new handsets registered
to this base will ring.
IMPORTANT: If you connect several bases together, the handsets registered
to the additional bases will ring for a few seconds during an incoming call
even if you take the line with one of the first base handsets.