Geemarc Ampli DECT150 - Manual (Page 27)

27
TROUBLE SHOOTING
IF THE PHONE DOES NOT WORK
Generality:
Make sure that the phone line cord and adaptor are correctly plugged in and are not
damaged.
Make sure that the batteries are fully charged.
Connect another phone on your phone socket or move your phone to another socket
to check if the failure is coming from your phone or your PTT socket.
A warning tone is heard during a call:
The batteries are empty and the handset needs to be replaced in the base unit
.
The phone does not work:
Make sure that the line cord and the power adaptor are correctly connected to the
base unit or to the PTT plug and wall power socket.
No number is displayed when the phone rings:
- Please contact your phone network provider to get the caller identification service.
- When the caller does not want to show his or her number (private number), the
display will show ******. However, it could be a call from a PBX and caller ID may not
work properly if the phone is connected to a PBX.