GE X-9 - Manual (Page 18)

5 Menus
18
TASCAM X-9 Owner’s Manual
Function
Menu
display
Meaning Available settings Notes
Headphone EQ 01HP Sets headphone EQ to
normal, high or low
boost nOr * (no EQ)
H High boost
L Low boost
HL High and low boost
Can be performed on
both left and right menu
systems.
Takes immediate effect
before being confirmed.
Program 1 fader
start 02F1 Sets fader start for pro-
gram 1 on or off OFF * Fader start disabled
On Fader start enabled
Can be performed on
both left and right menu
systems.
Program 2 fader
start 03F2 Sets fader start for pro-
gram 2 on or off OFF * Fader start disabled
On Fader start enabled
Can be performed on
both left and right menu
systems.
Program 3 fader
start 04F3 Sets fader start for pro-
gram 3 on or off OFF * Fader start disabled
On Fader start enabled
Can be performed on
both left and right menu
systems.
Program 4 fader
start 05F4 Sets fader start for pro-
gram 4 on or off OFF * Fader start disabled
On Fader start enabled
Can be performed on
both left and right menu
systems.
Cross-fader A start 6cFA Sets the cross-fader to
start signal A playback OFF Fader start disabled
On * Cross-fader starts signal A
playback
Can be performed on
both left and right menu
systems.
Cross-fader B start 7cFb Sets the cross-fader to
start signal B playback OFF Fader start disabled
On * Cross-fader starts signal B
playback
Can be performed on
both left and right menu
systems.
Footswitch
assignment 08Ft Sets the function of the
footswitches connected
to the X-9. EF * links to internal effects
(1=effect 1, 2=effect 2)
E links to external effects (1& 2=
external)
S1 Sampler 1 (1=in, 2=out)
S2 Sampler 2 (1=in, 2=out)
CF Crossfader ( 1 on, hard A
side, 1 off, current position; 2
on, hard B side, 2 off, current
position)
Can be performed on
both left and right menu
systems.
EQ memory store 09EM Stores currently-
selected EQ settings to
memory. Use the left menu system for programs 1 and 3.
Use the right menu system for programs 2 and 4.
The
EQ MEMO indicator lights when 09EM is selected
When ENTER is first pressed, the lowest empty memory
bank number is shown. Use the dial to select a bank.
If the bank already contains a setting, the display shows
SURE . Press ENTER to overwrite, or any other key to
cancel.
EQ memory recall 10Er Recalls stored EQ mem-
ory settings to current
program. Use the left menu system for programs 1 and 3.
Use the right menu system for programs 2 and 4.
The
EQ RECALL indicator lights when 10Er is selected
Use the dial to select a bank containing EQ memory (only
banks containing data are shown).
Press
ENTER to recall the memory.