GE X-9 - Manual (Page 25)

7 Effects
TASCAM X-9 Owner’s Manual
25
Recalling stored effect settings
There are two procedures, depending on whether the
EFFECT key is lit or not.
If the EFFECT key is lit…
1 Press and hold the
FUNCTION key for
about two seconds. The
display shows
MEMO
(MEMO).
2 Turn the DATA knob coun-
terclockwise so that the
effect
RECALL indicator is
flashing.
3 Press the ENTER key. The RECALL
indicator now lights steadily.
4 Turn the DATA knob to choose between the
numbers of the slots which have been filled
(the numbers of empty slots are not shown)
and
dFLt (dFLt—default).
5 Press the ENTER key to recall the
settings. The effect is activated, and
after one second, the X-9 returns to
the “recalled” status in step
3 .
Alternatively:
If the EFFECT key is not lit…
1 Press and hold the
FUNCTION key for
about two seconds.
The
RECALL indica-
tor lights.
2 Turn the DATA knob to choose
between the numbers of the slots
which have been filled (the numbers
of empty slots are not shown) and
dFLt (dFLt—default).
3 Press the ENTER key to recall the
settings. The effect is activated (but
cannot be heard until the
EFFECT
key is lit), and after one second, the X-9
returns to the “recall ready” status in step
2 .
In both cases:
Exit the store/recall mode by pressing the
FUNCTION key for about 2 seconds or press-
ing the EFFECT key or changing the effect
type with the effect selection control.
TIP
You can clear all stored effect settings using the menu
system (25Ec). See “Clear all effect memories” on
page 20 for details.
MEMO
MEMO