GE X-9 - Manual (Page 33)

10 Specifications, etc.
TASCAM X-9 Owner’s Manual
33
Mounting the X-9 in a rack
When mounting the X-9 in a 19” rack, use only the
supplied rack-mount ears and mounting screws, etc. As shown here, remove the five screws (1) on the left
side of the unit.
Locate and fit the left rack-mount angle (with the fan
cutout) and fasten it to the X-9 using the five screws
removed in the previous step.
Fit the right rack-mount angle in the same way.
Case mounting
WARNING
It is most important that if you are mounting the X-9 in
a rack or in a case, that the supplied fan cover and ven-
tilation cover are fitted as explained here. This ensures
a smooth airflow, and prevents the fan and ventilation
vents from being blocked, which could cause overheat-
ing and damage to the X-9.
Remove the two screws (1) on the left side of the X-9
as shown here.
Use the four screws supplied with the fan cover to
attach the fan cover.
Repeat the process for the ventilation cover on the
right side of the X-9.