GE X-9 - Manual (Page 8)

2 Getting acquainted with the X-9
8
TASCAM X-9 Owner’s Manual
Master fader
The master fader is used to control
the overall level of the mixed signal
output from the X-9.
See “Signal flow” on page 15 for
details of how this works in conjunc-
tion with the input, etc., signals in
the X-9.
Program faders
These faders adjust the levels of the programs after
they have been equalized and before they are sent to
either the cross-fader or to the master fader. The fader curve and fader direction can also be set,
and fader program start can be carried out.
See “About programs” on page 14 for details of how
programs and signals interact.
See “Faders” on page 21 for further details about
fader settings.
External effect
These controls affect the assignment
and the on/off status of any external
effect connected to the X-9. See “External effects” on page 13 for details of how
to connect and use an external effect processor with
the X-9.