Graco 8480 - Manual (Page 26)

2. If a front passenger seat is used, slide the
vehicle seat rearward as far as possible from
the dashboard. If a rear seat is used, make sure
the seat in front of it is moved forward enough
and is upright enough to allow room for the
car seat.
3. Be sure that the vehicle seat back is locked in
position.
4. Place the car seat firmly against the back of a
forward-facing vehicle seat. If you are using
the tether, lay it over the back of the vehicle
seat so it won’t get hidden behind the back of
the car seat.
5. Thread the seat belt:
Follow diagram
‹
if you are
using a
lap/shoulder
belt
Follow diagram
Œ
if you are
using a lap-only
belt
‹
Œ
26