Graco 8480 - Manual (Page 45)

45
5. Under the front of the
seat push in the tab to
remove the adjustment
button plate

.
6. Turn adjustment plate
sideways and work it
through the hole in the
seat cover
Ž
. It will be a
tight fit so be careful
not to tear the seat
cover.
7. Lift cover off seat,
pushing harness straps,
crotch strap and hardware
through slots in cover.
DO NOT USE car seat
without the seat cover.
8. Machine wash cover in cold water on delicate
cycle and drip-dry. DO NOT USE BLEACH.
9. To put the seat cover back on, reverse the
preceding instructions. Push the adjustment
plate and strap through the hole in the seat
cover. Be careful not to tear the seat cover.
10. Insert the two
fingers of the
adjustment plate
into the back of the
hole in the seat

.

Ž
