Graco 8480 - Manual (Page 46)

46
Push the fabric up so
that the tab under the
adjustment plate is under
the cloth
‹
. Snap the
adjustment plate back
on the seat
Œ
. Make
sure that the adjustment
plate is attached securely
to the seat and that the
strap moves freely when
the button is pushed.
Thread the harness straps
through the appropriate
holes in the seat cover.
See the illustration at
right and section 5.1,
“Positioning the
Harness Straps”
(page 15) to
properly secure the
harness straps back
on the seat

.
11. Secure the seat
cover to the seat
by wrappin the elas-
tic binding around
two pegs on the bot-
tom and and two
pegs on the top of
car seat.

Œ
‹