Graco 8480 - Manual (Page 27)

27
6. Buckle the vehicle belt. Make sure the buckle
tongue goes into the correct buckle, and not the
adjacent one

. The vehicle belt should not be
twisted or turned.
7. Now the vehicle seat belt must be tightened.
Push down hard with
your knee or free hand
in the middle of the car
seat
Ž
. Then pull and
tighten the vehicle belt.
 If you have a lap-only
belt, go to step 8.
 If you have a lap/
shoulder combination
belt, go to step 9.
8. Tightening a lap-only belt:

An automatically adjusted lap belt

is
tightened by feeding the vehicle belt back into
its retractor while pushing down hard on the car
seat. Make sure that vehicle belt is locked in
place and very tight.


Ž