Miele Laboratory Glassware Washer G 7883 - Manual (Page 63)

Positioning and securing the
machine
To ensure stability the washer must first
be aligned and then secured to the
countertop.
^ Open the door.
^ Screw the washer to the countertop
through the left and right holes in the
front trim.
Do not use silicone sealant to seal
the gaps between the machine and
any neighboring cabinets/
appliances. This will block
ventilation to the circulation pump.
Protecting the countertop
Important for machines with steam
condenser (depending on model):
To prevent steam damage to the
countertop, adhere the protective foil
9
13
/
16
" x 22
13
/
16
" (25 x 58 cm)
underneath the countertop near the
steam condenser.
Depending on the requirements for
installation, the following kit can be
ordered from the Miele Technical
Service Department.
Cover plate (protects the countertop)
The underside of the countertop is
protected from steam damage by a
stainless steel plate.
Installation
63