Moyer Diebel 501HT - Manual (Page 19)

9
Install Scrap Screen
1. Remove any protective film from dishwasher.
2. Check the interior for foreign material.
3. Make sure the dishwasher is permanently located.
4. Make sure all utility connections are complete.
5. Make sure the flexible drain hose and the hot water fill hose are not kinked.
6. Make sure that the chemical supply containers are full and the chemical pick-up tubes
are installed in the proper containers.
7. Make sure the scrap screen is in place.
8. Make sure the spray arms are in place and that they spin freely.
9. Close the dishwasher door.
10. Turn hot water supply on and check for leaks in the main water supply piping connected
to the dishwasher.
Initial Start-up
Check List
All Models