Meridian America D-ILA 1080MF1 - Manual (Page 11)

11
A Rx/Tx Indicators
This indicator lights up during communication
with a remote control system or computer
connected to the serial port.
Rx : Lights up when unit is receiving RS-232C
data.
Tx : Lights up when unit is sending RS-232C
data.
B MENU Button
Press this button to display the menu. Pressing
this button when the menu is displayed clears
the menu.
C EXIT Button
Press this button to return to the previous
hierarchical menu (for example, to return from
submenu to main menu). Pressing this button
when the main menu is displayed clears the
menu.
D ZOOM Tele/Wide Buttons
Use these buttons to change the size of the
projected image.
E FOCUS +/- Buttons
Use these buttons to adjust focus of the pro-
jected image.
F Cursor Buttons
Use these buttons when selecting and adjust-
ing menu options.
G ENTER Button
Press this button to show the next hierarchical
menu (for example, to enter a submenu from
the main menu). It is also used when
ENTER is
displayed against a selection item on the menu
screen.
H OPERATE ON Button
When this unit is in the standby mode, press-
ing this button for more than 1 second will
turn the unit on. The
OPERATE indicator will
illuminate to confirm this status.
I OPERATE OFF Button
When the unit is operating (projecting), press-
ing this button for more than 1 second switch-
es the unit to the cool down mode, which
will automatically switch to the standby mode
after about 60 seconds.
• The OPERATE OFF button will not work within
approximately 1 minute of the light source
being turned on. In this case, wait at least a
minute before pressing this button.
J HIDE Button
Use this button to temporarily turn off the
video image. Press again to resume.
Control Panel
T
W
ZOOM
+
-
FOCUS
MENU EXIT
OPERATE
ON
OPERATE
OFF
HIDE
RS232C Rx Tx
A B C
D E F G
H
I
J