Meridian America D-ILA 1080MF1 - Manual (Page 12)

12
A STANDBY Indicator
Light on: Unit is in standby mode.
Blinking: Unit is cooling down.
B OPERATE Indicator
Light on: Illuminated when unit is currently
operating (projecting).
C LAMP Button
Light on indicates that:
• the lamp needs to be replaced soon or immedi-
ately;
• the lamp cover is removed;
• the lamp has failed and the unit is unable to
project; or
• when the lamp fails during projection.
D TEMP Indicator
Light on: The internal temperature of the unit
is abnormally high.
Blinking : The lamp needs to be replaced soon
or immediately, or a failure has occurred in the
unit.
E FAN Indicator
Light on : The internal fan has unintentionally
stopped running.
Blinking : The lamp has reached the end of
its life and it is time to replace the lamp, or a
failure has occurred in this unit.
F HIDE Indicator
Light on : The video image has been temporar-
ily cleared by pressing the
HIDE button.
Blinking : A fault has occurred.
Indicators
STANDBY
OPERATE
LAMP
TEMP
FAN
HIDE
A
B
C
D
E
F