MSI G52-S9617X1 - Manual (Page 16)

1-6
MS-9617 ATX Workstation Board
Left-side: C urrent system status
In the left sub-menu, you can configure the settings of FSB, Vcore, Memory Voltage
and AGP Voltage by clicking the radio button in front of each item and make it available
(the radio button will be lit as yellow when selected), use the
“+” and “-” buttons to
adjust, then click “ok” to apply the changes. Then you can click Save to save the
desired FSB you just configured.
Also you may click Auto to start testing the maximal CPU overclocking value, The
CPU FSB will automatically increase the testing value until the PC reboots. Or you may
click Default to restore the default values.
Right-side: PC hardware status during real time operation
In the right sub-menu, here you can configure the PC hardware status such as CPU
& system temperatures and fan speeds. You may use the scroll bars to adjust each
item, then click
“ok” to apply the changes. The values you set for the temperatures
are the maximum thresholds for the system for warnings, and the value for fan
speeds are the minimum thresholds.
Top-side: User mode/Auto mode
Here you may adjust the CPU fan speed. If you choose User mode, you may adjust
the CPU fan speed in 8 different modes, from Stop to Full speed.
MSI Reminds You...
Items shown on Core Center may vary depending on your system status.
9617v1.0-1.p65 2005/6/9, 下午 04:26 6