MSI G52-S9617X1 - Manual (Page 48)

3-8
MS-9617 ATX Workstation Board
Advanced BIOS Features
Hard Disk Boot Priority
Press <Enter> and the following sub-menu appears:
Select the hard disk priority (from the 1st to the 8th) in this list. Use the arrow-
up and arrow-down keys to select a device, then press <+> to move it up or <->
to move it down.
Quick Power On Self Test
Select Enabled to reduce the amount of time required to run the power-on self-test
(POST). A quick POST skips certain steps. We recommend that you normally disable
quick POST. Better to find a problem during POST than lose data during your work.
First/Second/Third Boot Device
The items allow you to set the sequence of boot devices where BIOS attempts to load
the disk operating system.
Boot Other Device
Setting the option to [Enabled] allows the system to try to boot from other device if the
system fails to boot from the 1st/2nd/3rd boot device.
Boot Up NumLock Status
Toggle between [On] or [Off] to control the state of the NumLock key when the
system boots. W hen toggled [On], the numeric keypad generates numbers instead of
controlling cursor operations.