MSI G52-S9617X1 - Manual (Page 60)

3-20
MS-9617 ATX Workstation Board
Hammer Vid Control
This item lets you adjust the CPU VID. Setting to [Startup] enables the CPU running at
the default VID which is detected by system. Setting options are: [Startup], [0.825V],
[0.850V], [0.875V],~, [1.550V].
IRQ/Event Activity Detect
Press <Enter> and the following sub-menu appears.
LPT & COM, HDD & FDD, PCI Master
These fields specify whether the system will be awakened from power saving
modes when activity or input signal of the specified hardware peripheral or
component is detected.
PowerOn by PCI Card
W hen it is set to [Enabled], the feature allows your system to be powered on by
the PCI card. Setting options: [Enabled], [Disabled].
M odem Ring Resume
W hen it is set to [Enabled], the feature allows your system to support COM port
Modem to resume. Setting options: [Enabled], [Disabled].
RTC Alarm Resume
W hen it is set to [Enabled], your can set the date and time at which the RTC
(real-time clock) alarm awakens the system from Suspend mode.
Date (of Month)
The field specifies the date for RTC Alarm Resume. Settings: [0] ~ [31].
Resume T ime (hh:mm:ss)
The field specifies the time for RTC Alarm Resume. Format is [hour] [minute]
[second].
MSI Reminds You...
If you have changed this setting, you must let the system boot up until
it enters the operating system, before this function will work.