Mitel 5330 IP Phone - Manual (Page 26)

5330/5340 SIP User and Administrator Guide
20
Auto Answer
You can use Auto Answer to automatically answer incoming calls in handsfree or headset mode.
To enable or disable Auto Answer:
• Access the Feature Configuration page of the Web Configuration tool (see Accessing the
Web Configuration Tool on page 10).
To answer an Auto Answer call:
• Begin speaking when the call arrives.
To end an Auto Answer call, do one of the following:
• Press (CANCEL).
• Wait for the caller to hang up.
Answer a Call Waiting
The 5330 and 5340 IP Phones allow a default quantity of three calls waiting while you are on a
call. New calls wait on the next free line. When a new call arrives, you hear a call waiting tone,
the name of the new caller appears, and the corresponding Line key flashes. If all lines are busy,
callers hear a busy signal. (Number of calls waiting is dependent upon the number of Line keys
you have programmed.)
To answer a waiting call:
• Press the flashing Line key of the call waiting. The current call is put on hold, and you are
connected to the new caller.
To return to the original call:
• Press the associated flashing Line key.
Calling and Called Party Display
SIP phones display the true (programmed) identity of the called/calling party rather than the
standard number/name display.