Mitel 5330 IP Phone - Manual (Page 29)

5330/5340 IP Phone SIP User and Administrator Guide
23
• To transfer the call without speaking to this party, immediately press
(TRANS/CONF), and then hang up. The held call will be transferred to the call in
progress.
• To cancel the transfer, press
(CANCEL). You are returned to the held call.
Transfer a Call to a Third Party Already on Hold
1. While on a call, press (TRANS/CONF). The call is put on hold.
2. Press the Line key of the call on hold, and then press (TRANS/CONF).
3. Hang up.
Conference Call (Three-Way)
When two parties are connected on a call, either of those parties can originate a three-way
conference by adding a third party to the call in progress. Once three parties are connected, no
more parties can be added to that call.
A party can be involved in more than one three-way conference call at a time, but the calls cannot
be merged. For example, A and B are on a call. A adds C to create three-way conference call
ABC. B adds D to the call with A to make conference call ABD. ABC and ABD remain separate–
D is not added to conference call ABC.
Add a Third Party to a Call in Progress
1. Press (TRANS/CONF). The current call is put on hold.
2. Press a free Line key, and then do one of the following:
• Dial the number.
• Press
a Speed Dial key.
• Press
(REDIAL). .
3. Press Conf. The call you put on hold in step 1 is now connected to the call in progress.
Note: If the new party does not answer, press (CANCEL) twice to return to the held party.
Note: Each conference member (other than the conference initiator) may initiate another three-
way conference.
Add a Party On Hold to a Call in Progress
1. Press (TRANS/CONF). The current call is put on hold.
2. Press the Line key of the party already on hold.
3. Press (TRANS/CONF). The call put on hold in step 1 is connected to the call in
progress.
Leave a Conference Call
Do one of the following:
• Hang
up.
• Press (CANCEL).