Mitel 5330 IP Phone - Manual (Page 30)

5330/5340 SIP User and Administrator Guide
24
Note: If any party in a conference call hangs up, the other parties remain connected.
Return to a Conference Call After Accepting an Outside Caller
If the originator of a conference responds to a call from another party during a conference, the
other two conference members are put on hold.
To resume the conference, the originator must:
1. Select one of the held lines and then press (TRANS/CONF).
2. Select the remaining held line and then press the Conf softkey.
Messages - Advisory
An advisory message about your whereabouts appears on your caller's display.
Create an Advisory Message
• Access the Feature Configuration page of the Web Configuration Tool (see Accessing
the Web Configuration Tool on page 10).
Enable/Disable your Advisory Message
To enable or disable an advisory message:
1. Press Applications , and then press >> until Features? appears.
2. Press OK, and then press Next or Prev until ADVISORY MESSAGE? appears.
3. Press OK. The first of several advisory messages appears.
4. Press (UP) or (DOWN) to navigate to the desired message.
5. Press TurnOn or TurnOff to enable or disable the message. When enabled, the
Advisory Message appears in the information area of the phone display.
6. Do one of the following:
• To return to the Features menu, press Exit.
• To return to the default display, press Applications
.
Note: To enable/disable advisory messages using the Web Configuration Tool, access the tool’s
Feature Configuration page (see page 10).
Messaging – Voice Mail
Your Administrator configures your voice mail information so you can receive and access voice
mail messages. The Ring/Message Indicator flashes to indicate waiting messages.
Note: For administrative information about voice mail, see Voice Mail on page 48.
Access your Voice Mail Messages
1. Lift the handset (optional).
2. Press (MESSAGE) and enter your voice mailbox number.
3. Follow the voice mailbox prompts.