Mitel 5330 IP Phone - Manual (Page 54)

5330/5340 SIP User and Administrator Guide
48
Automating Firmware Upgrades
You can configure phones to poll the server for new versions of firmware. When the phone
detects a firmware upgrade, it downloads the new version and stores it in memory. When it is
next idle, the phone reboots with the new firmware.
To automate firmware upgrades, Administrators can set a Firmware Upgrade option and a polling
interval on the Firmware Update page of the Web Configuration Tool. For programming options,
refer to the online help supplied with the Web Configuration Tool.
To upgrade firmware on multiple phones, refer to the Mass Deployment topic in the Administrator
Tools section of the Web Configuration Tool Online Help.
SRTP Call Encryption Indicator
For information about the Call Encryption setting, see Call Encryption Indicator on page 7. Also
refer to the Configuring Protocols topic in the Administrator’s Web Configuration Tool Online
Help.
Line Types
There are three types of lines:
• Prime lines: a minimum of two prime lines is mandatory. (5330/5340 phones support
four prime lines.)
• Non-prime lines: optional programmed lines
• Shared lines: accessible by multiple telephones (See Shared Lines and Keys on page
29.)
Voice Mail
Voice mail for SIP-supported phones is server-based. For more information about the voice mail
system, contact your SIP Service Provider.
Configuring Voice Mail
To configure voice mail using the Web Configuration Tool:
• Access
the Administrator Tools > Configuring SIP Features section in the Administrator’s
Web Configuration Tool online help.
• Configure
a Message Waiting Indicator (MWI) key using the Web Configuration Tool.
To configure voice mail server using the Applications Key:
1. Press Applications , and then press >> until ADMIN TOOLS? appears.
2. Press OK, and then press Next until NETWORK SETTINGS? appears.
3. Press OK, enter your administrator password, and then press Submit.
4. Press Next until VOICE MAIL SERVER appears, and then press Review.
5. Press Change, enter the IP address of the voice mail server, and then press Submit.
After the information is saved, VOICE MAIL SERVER appears.
6. Press Next. VOICE MAIL PORT NUM appears.
7. Press Review, and then press Change.
8. Enter the voice mail port number, and then press Submit. After the information is saved,
VOICE MAIL PORT NUM appears.