Miller Electric IH - Manual (Page 22)

OM-203 185 Page 18
In general, for those locations that observe DST:
DST begins at 2:00 am on the first Sunday in April.
DST ends at 2:00 am on the last Sunday in October.
See “http://deil.lang.uiuc.edu/web.pages/holidays/DST.html for exceptions.
NOTE
8. Touch Apply.
6-2-2-5. Time And Date Setup
1. Touch System.
2. Touch Clock.
3. Adjust time and date, if necessary.
4. Touch Apply.
6-2-2-6. Login As User
1. Touch top left corner (Engineer).
2. Touch pull down next to User.
3. Touch User from pull down list.
6-2-2-7. Go To Home Screen
1. Touch the Menu key in bottom right corner to open Root Menu.
2. Touch Home.
6-2-2-8. Channel Cycling On/Off And Notes
When Trend graphs are displayed, the operator has the option to sequentially display the TC readings for each
channel by activating the “Channel Cycling On”option. When channel cycling is off, recorder displays only the
selected TC value.
To activate/deactivate “Channel Cycling”:
1. Press the Option key to open options menu.
2. Press channel cycling On to activate cycling or press channel cycling Off to deactivate cycling.
scrn34
To manually change which TC is
displayed, press the TC field to
advance to the next TC reading.
Notes can be added to a chart on
the recorder while viewing a trend
screen.
Press the “Option Menu” button.
Press “Note”.
Press the field next to “User Note”
and enter notes using keypad.
Press “OK”.
Press “OK”.
The note is added to the chart.
The note can be viewed on the
bottom of the screen or in the
history screen.
Press the Option key, press “Enter
History”.
To exit, press the Option key, then
press “Exit History”.