Ssh console, Ssh console -4 – Moxa Technologies UC-7420/7410 User Manual
Page 24
UC-7420/7410 User’s Manual
Getting Started
2-4
ATTENTION
Serial Console Reminder
Remember to choose VT100 as the terminal type. Use cable CBL-RJ45F9-150, which comes
with UC-7420/7410, to connect to the serial console port.
Telnet Reminder
When connecting to UC-7420/7410 over a LAN, you must configure your PC’s Ethernet IP
address to be on the same subnet as the UC-7420/7410 you wish to contact. If you do not get
connected on the first try, re-check the serial and IP settings, and then unplug and re-plug
UC-7420/7410’s power cord.
SSH Console
UC-7420/7410 supports an SSH Console to offer users with better security options.
Windows Users
Click on the lin
to download
PuTTY (free software) to set up an SSH console for UC-7420/7410 in a Windows environment.
The following figure shows a simple example of the configuration that is required.