Moxa Technologies UC-7420/7410 User Manual
Page 28
Advertising
UC-7420/7410 User’s Manual
Getting Started
2-8
3. Configure the Wireless LAN card’s default SSID setting profile.
(Default SSID is “any”)
#vi /etc/wlan/wlan.conf
// Consult your network administrator for SSID required in your wireless
network. For example, SSID_waln0=”any”, Enable_wlan0=y//
4. Duplicate the configuration profile to a new profile.
#cp /etc/wlan/wlancfg-DEFAULT /etc/wlan/wlancfg-any
// Copy configuration profile “DEFAULT” to new configuration profile “any”//
5. Configure the WEP setting, if WEP is required on your wireless network.
#vi /etc/wlan/wlancfg-any
Advertising