Moxa Technologies UC-7420/7410 - Manual (Page 49)

UC-7420/7410 User’s Manual Managing Embedded Linux
3-9
SxxRUNFILE stands for
S: start the run file while linux boots up.
xx: a number between 00-99. The smaller number has a higher priority.
RUNFILE: the file name.
192.168.3.127 – PuTTY
root@Moxa:/ect/rc.d/rc3.d# ls
S19nfs-common S25nfs-user-server
S99showreadyled
S20snmpd S55ssh
S24pcmcia S99rmnologin
root@Moxa:/ect/rc.d/rc3.d# ln –s /root/tcps2-release S60tcps2
root@Moxa:/ect/rc.d/rc3.d# ls
S19nfs-common S25nfs-user-server
S99rmnologin
S20snmpd S55ssh S99showreadyled
S24pcmcia S60tcps2
root@Moxa:/etc/rc.d/rc3.d#
KxxRUNFILE stands for
K: start the run file while linux shuts down or halts.
xx: a number between 00-99. The smaller number has a higher priority.
RUNFILE: is the file name.
For removing the daemon, you can remove the run file from /etc/rc.d/rc3.d by using the following
command:
#rm –f /etc/rc.d/rc3.d/S60tcps2
Adjusting the System Time
Setting the Time Manually
UC-7420/7410 has two time settings. One is the system time, and the other is the RTC (Real Time
Clock) time kept by the UC-7420/7410 hardware. Use the #date command to query the current
system time or set a new system time. Use #hwclock to query the current RTC time or set a new
RTC time.
Use the following command to query the system time:
#date
Use the following command to query the RTC time:
#hwclock
Use the following command to set the system time:
#date MMDDhhmmYYYY
MM = Month
DD = Date
hhmm = hour and minute
YYYY = Year
Use the following command to set the RTC time:
#hwclock –w
Write current system time to RTC
The following figure illustrates how to update thesystem time and set the RTC time.