Multi-Tech Systems MT3334ZDX - Manual (Page 17)

2 - Installation
17
Software Configuration
Communications software must be configured to work with the
MultiModemZDX, your computer, and the remote system it is calling.
Fortunately, most communications programs make the process easy by
providing a default initialization string to your modem as well as defaults
for most of the other required parameters.
Some software programs allow you to select your modem type from a
menu. By this method, initialization strings that correspond to a particular
modem type can be selected to operate optimally with the software it is
utilizing.
Figure 2-4. MultiModemZDX Initialization Setup
Other software programs require you enter an initialization string in the
software modem setup screen. If this is the requirement in your software
application, enter the following command string to initialize your modem:
AT&F<cr>
This setting configures your modem to operate optimally with the software
it is utilizing.
Note: Refer to your respective software manual for further information on
your communications software.