Multi-Tech Systems MT3334ZDX - Manual (Page 30)

MT3334ZDX/V Owner's Manual
30
Command: N n Modulation Handshake
Values: n = 0 or 1
Default: 1
Description: N0 Modem performs handshake only at
communication standard specified by S37 and the
B command.
N1 Modem begins handshake at communication
standard specified by S37 and the
B command.
During handshake, fallback to a lower speed can
occur.
Command: O n Return Online to Data Mode
Values: 0 or 1
Default: None
Description: O0 Exit online command mode and return to data
mode (see +++AT<CR> Escape Sequence
command).
O1 Issue a retrain and return to online data mode.
Command: Q n Enable/Disable Result Codes
Values: n = 0 or 1
Default: 0
Description: Q0 Enable Result Codes.
Q1 Disable Result Codes.
Command: S r=n Set Register Value
Values: r = S-register number; n varies
Default: None
Description: Set value of register S r to value of n, where n is
entered in decimal format.
Command: S r? Read Register Value
Values: r = S-register number
Default: None
Description: Read value of register Sr and display value in 3-
digit decimal form.
Command: V n Terse/Verbose Result Code Format
Values: n = 0 or 1
Default: 1
Description: V0 Displays Result Codes as digits (terse response).
V1 Displays Result Codes as words (verbose
response).